If you're a PerfectDraft user, you might be wondering how to insert a tube into the tap unit. Whether you're new to the machine or simply looking for a refresher, this guide will walk you through the process step-by-step.
Step-by-Step Guide to Connecting the Tube
-
Prepare the Tube:
- Start by lightly squeezing the rubber section of the tube. This will help make it easier to insert into the port.
-
Insert the Tube:
- Gently push the tube into the port. Be careful not to force it in too hard. You should feel a slight resistance as the tube enters the port.
- As you push the tube into the port, you may hear a click. This is normal and indicates that the tube has been inserted correctly. If you don't hear a click, gently wiggle the tube back and forth until you feel it click into place.
-
Check the Connection:
- Make sure the tube is securely in place by gently tugging on it. If it comes out easily, you may need to try again or seek assistance from the customer service team.
Summary Table
| Step | Action |
|---|---|
| 1. Prepare the Tube | Lightly squeeze the rubber section of the tube to ease insertion. |
| 2. Insert the Tube | Gently push the tube into the port until you feel resistance and hear a click. |
| 3. Check the Connection | Gently tug on the tube to ensure it is securely in place. |
By following these steps, you can ensure that your tube is properly connected to the tap unit, allowing for optimal performance of your PerfectDraft machine.
If you encounter any issues or need further assistance, don’t hesitate to contact our customer service team for support. For more information or to get in touch with customer service, visit our website at TheKegCru.ie. We are committed to ensuring your PerfectDraft experience is seamless and enjoyable.